A/T Housing Secondary Shaft ATF Feed Pipe Cap, Feed Pipe Replacement (A/T)

A/T Housing Secondary Shaft ATF Feed Pipe Cap, Feed Pipe Replacement

NOTE: The 1st-hold clutch ATF feed pipe/ATF feed cap is not available separately.

1. Remove the ATF feed pipe cap from the transmission housing A/T Housing Secondary Shaft ATF Feed Pipe Cap Removal (A/T).

2. Remove the snap ring (A) from the ATF feed pipe cap (B), then remove the feed pipe guide (C), the O-rings (D) (E), and the 1st clutch ATF feed pipe (F).





3. Replace the 1st clutch ATF feed pipe or 1st-hold clutch ATF feed pipe/ATF feed pipe cap assembly.

4. Install a new O-ring (D) over the 1st clutch ATF feed pipe, then install the feed pipe over the 1st-hold clutch ATF feed pipe (G) while aligning the feed pipe tabs (H) with the guide in the cap.

5. Install a new O-ring (E) in the cap and the feed pipe guide, then secure the guide with the snap ring.

6. Install the ATF feed pipe cap in the transmission housing A/T Housing Secondary Shaft ATF Feed Pipe Cap Installation (A/T).