31-01

EPS DTC Troubleshooting: 31-01

DTC 31-01:

Torque Sensor Neutral Position Not Written

1. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode.

2. Clear the DTC with the HDS.

3. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.

4. Do the memorizing of the torque sensor neutral position Testing and Inspection.

5. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode.

6. Check for DTCs with the HDS.

Is DTC 31-01 indicated?

YES -

Replace the EPS control unit Service and Repair.�

NO -

The system is OK at this time.�