C-Pillar Outer Trim Replacement

C-Pillar Outer Trim Replacement

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program; call 888-424-6857

NOTE:

- Take care not to scratch the trim or the body.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Open the rear door.

2. Pry up on the edge of the C-pillar outer trim (A) with a trim tool to detach the clips, then remove the trim.






3. Install the trim in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Make sure you cannot see the EPT foams (B) from outside.
- Push the clips into place securely.