Traction Control Switch: Testing and Inspection

VSA Off Switch Test/Replacement

'10-11 models

NOTE: If the low tire pressure indicator turns ON, the VSA cannot be turned OFF. Check the tire pressure first.

1. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.

2. Remove the driver's dashboard undercover Driver's Dashboard Undercover Removal/Installation.

3. Push out the VSA OFF switch (A) from the back of the dashboard.





4. Disconnect the VSA OFF switch 5P connector (B).

5. On the switch side, check for continuity between the VSA OFF switch 5P connector terminals No. 1 and No. 2. There should be no continuity when the button is pressed, and continuity when the button is released.





6. Install the VSA OFF switch in the reverse order of removal.