Torque Converter Housing Intermediary Shaft Bearing Replacement

Torque Converter Housing Intermediary Shaft Bearing Replacement

Special Tools Required

- Adjustable Bearing Puller, 25-40 mm 07736-A01000B
- Driver Handle, 15 x 135L 07749-0010000
- Bearing Driver Attachment, 52 x 55 mm 07746-0010400

1. Remove the intermediary shaft bearing from the torque converter housing using the 25-40 mm adjustable bearing puller and a commercially available 3/8 "-16 slide hammer (A).






2. Install the ATF guide plate (A), then install a new bearing (B) in the torque converter housing.






3. Drive the bearing into the torque converter housing using the driver handle and the 52 x 55 mm attachment.