Advanced Diagnostics
Advanced Diagnostics - DTC P0780: Shift Control SystemGeneral Description
This fault code is a general (specified by SAE) DTC that is stored at the time the following DTC codes (P1730, P1731, P1732, P1733, and P1734) are detected.
Monitor Execution, Sequence, Duration, DTC Type, OBD Status
Enable Conditions
Refer to the specific DTC information. (P1730, P1731, P1732, P1733, P1734)
Malfunction Threshold
One of these DTCs is stored.
P1730, P1731, P1732, P1733, P1734
Diagnosis Details
Conditions for setting the DTC
When a malfunction is detected during the first drive cycle, a Pending DTC is stored in the PCM memory. If the malfunction returns in the next (second) drive cycle, the MIL comes on and a Confirmed DTC and the freeze data are stored.
Conditions for clearing the DTC
The MIL is cleared if the malfunction does not return in three consecutive trips in which the diagnostic runs. The MIL, the Pending DTC, the Confirmed DTC, and the freeze data can be cleared with the scan tool Clear command or by disconnecting the battery.