Audio Switch Panel Removal/Installation

Audio Switch Panel Removal/Installation

With Premium Audio

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the dashboard and related parts.
- Lay a workshop towel under the parts when working on them to protect the face panel from scratches or other damage.
- Do not work in a dusty or dirty place.
- Discharge static electricity from your body before and during the work.
- Do not work with dirty hands.
- Do not touch the circuit board with your bare hands.
- Be careful not on fold the flat plate cable.
- Do not touch the terminal connector of the flat plate cable with your bare hands. (If you have touched it, wipe it off thoroughly.)

1. Remove the audio unit Audio Unit Removal/Installation and the hazard warning switch Service and Repair from the audio switch panel (A).





2. Install the audio switch panel in the reverse order of removal, and note these items:

- Make sure all the connectors and the antenna lead are secure.
- Enter the anti-theft codes for the audio system.