Security Indicator Does Not Work Properly (With ELS Audio)

Audio System Symptom Troubleshooting - Security indicator does not work properly

Security indicator does not work properly (with ELS audio)

NOTE:

- Check the vehicle battery condition first Battery Test.
- Check the connectors for poor connections or loose terminals.
- The security system operates without the 5-digit security (anti-theft) code.
- Before troubleshooting, make sure you have the 5-digit security (anti-theft) code.

1. Turn the ignition switch to ON (II).

2. Turn off the audio system.

Is the security indicator (LED) on (blink)?

YES -

Go to step 3.

NO -

Substitute a known-good audio-navigation unit (including the HDD) Audio-Navigation Unit Removal/Installation, and recheck. If the symptom/indication goes away, replace the original audio-navigation unit Audio-Navigation Unit Removal/Installation.�

3. Turn on the audio system.

Is the security indicator (LED) off?

YES -

The audio-navigation unit is OK at this time.�

NO -

Substitute a known-good audio-navigation unit (including the HDD) Audio-Navigation Unit Removal/Installation, and recheck. If the symptom/indication goes away, replace the original audio-navigation unit Audio-Navigation Unit Removal/Installation.�