Fuel Fill Door Replacement

Fuel Fill Door Replacement

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program; call 888-424-6857

NOTE:

- Take care not to scratch the body.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Apply the protective tapes (A) to the body surface as shown.






2. Close the fuel fill door (A) half-way. While prying the hook (B) up with a trim tool, slide the fuel fill door forward to release the notches (C) (four places) in the fuel fill door from the hooks (D) (four places) on the hinge arm (E), then remove the fuel fill door.





3. Install the fuel fill door in the reverse order of removal, and note these items:

- If the hooks of the hinge arm are damaged or if the fuel fill door is loose, replace the fuel fill door adapter with a new one Fuel Fill Door Adapter Replacement.
- Make sure each hook is installed securely.
- Make sure there is no gap between the fuel fill door and the hinge arm.