Cruise Control Combination Switch Test/Replacement

Cruise Control Combination Switch Test/Replacement

SRS components are located in this area. Review the SRS component locations Locationsand precautions and procedures Service and Repair before doing repairs or service.

1. Remove the driver's airbag Driver's Airbag Replacement.

2. Remove the steering trim Overhaul.

3. Remove the select/reset/information switch (A), then remove the cruise control combination switch (B).






4. Check for continuity between the terminals in each cruise control combination switch position according to the table:

- If there is continuity, and it matches the table, but the cruise control combination switch failure occurred on the cruise control input test, check and repair the wire harness on the switch circuit.
- If there is no continuity in one or more positions, replace the cruise control combination switch.





5. Install the cruise control combination switch in the reverse order of removal.