Manufacturer Code Charts: 62

VSA DTC Troubleshooting: 61, 62

DTC 61:

Battery Voltage Low

DTC 62:

Battery Voltage High

NOTE:

- Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information Reading and Clearing Diagnostic Trouble Codes.
- If the vehicle has high electric load or a weak battery, DTC 61 may be stored when starting the engine.

1. Turn the ignition switch to ON (II).

2. Clear the DTC with the HDS.

3. Turn the ignition switch to LOCK (0), then turn it to ON (II) again.

Does the ABS indicator come on?

YES -

Go to step 4.

NO -

Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting.�

4. Check for DTCs with the HDS.

Is DTC 61 or 62 indicated?

YES -

Check the battery Battery Test, and troubleshoot the alternator regulator circuit Alternator and Regulator Circuit Troubleshooting.�

NO -

Do the appropriate troubleshooting for the DTC indicated.�