Sunroof / Moonroof: Adjustments

Moonroof Glass Position Adjustment

The roof panel (A) should be even with the glass weatherstrip (B), to within 0+1/-1 mm (0+0.04/-0.04 in) all the way around, and the weatherstrip should evenly touch the roof panel at the front and rear. If not, make the following adjustment:





1. Remove the bracket cover.

2. Adjust the glass (A).

1. Slightly loosen the TORX bolts with a TORX T25 bit.

2. Move the glass up or down and forward or rearward.

3. Tighten all bolts securely.





3. If necessary, repeat on the opposite side.

4. Reset the moonroof control unit Programming and Relearning.

5. Check for water leaks. Use free-flowing water from a hose without a nozzle. Do not use high-pressure spray.

NOTE: It is normal for some water to seep past the moonroof into the moonroof frame, and exit through the drains.