Radiator and A/C Condenser Fan, Motor, and Shroud Removal and Installation

Radiator and A/C Condenser Fan, Motor, and Shroud Removal and Installation

Removal

1. Remove the engine compartment covers Service and Repair.

2. Do the battery removal procedure Removal and Replacement.

3. Remove the battery base.

4. Remove the intake air separator.

5. Remove the intake air duct.

6. Raise the vehicle on the lift.

7. Remove the front splash shield Front Splash Shield Replacement.

8. Disconnect the A/C condenser fan motor connector (A), and remove the harness clamp (B).





9. Loosen the A/C condenser fan shroud mounting bolts (C).

10. Disconnect the radiator fan motor connector (A).





11. Lower the vehicle on the lift.

12. Remove the A/C condenser fan shroud assembly (A).






13. Remove the upper brackets (A).





14. Remove the radiator fan shroud assembly (B).

NOTE: Pull-up the radiator, then move the radiator fan shroud assembly toward the right side of the vehicle to allow for enough space to lift it up and away from the A/C condenser fan shroud assembly.

15. Disassemble the fan shrouds.






Installation

1. Assemble the fan shrouds.






2. Install the radiator fan shroud assembly (A).





3. Install the upper brackets (B).

4. Install the A/C condenser fan shroud assembly (A).





5. Raise the vehicle on the lift.

6. Connect the radiator fan motor connector (A).






7. Tighten the A/C condenser fan shroud mounting bolts (A).





8. Connect the A/C condenser fan motor connector (B), and install the harness clamp (C).

9. Install the front splash shield Front Splash Shield Replacement.

10. Lower the vehicle on the lift.

11. Install the intake air duct.

12. Install the intake air separator.

13. Install the battery base.

14. Do the battery installation procedure Removal and Replacement.

15. Install the engine compartment covers Service and Repair.