A/T Clutch Inspection

A/T Clutch Inspection

1. Inspect the clutch pistons and the clutch piston check valves (A). If the clutch piston check valves are loose or damaged, replace the clutch piston.





2. Check the spring retainer for wear and damage. If the spring retainer is worn or damaged, replace it.

3. Inspect the clutch discs, the clutch plates, and the clutch end-plate for wear, damage, and discoloration.










- If the clutch discs are worn or damaged, replace them as a set. If the clutch discs are replaced, inspect the clearance between the clutch end-plate and the top disc A/T Clutch Clearance Inspection.
- If any clutch wave-plate is worn, damaged, or discolored, replace the damaged clutch wave-plate with a new clutch wave-plate, and inspect the other clutch wave-plates for phase difference A/T Clutch Wave-Plate Phase Difference Inspection. If the clutch wave-plate is replaced, inspect the clearance between the clutch end-plate and the top disc A/T Clutch Clearance Inspection.
- If any clutch flat-plate is worn, damaged, or discolored, replace them as a set. If the clutch flat-plate is replaced, inspect the clearance between the clutch end-plate and the top disc A/T Clutch Clearance Inspection.
- If the clutch end-plate is worn, damaged, or discolored, inspect the clearance between the clutch end-plate and the top disc A/T Clutch Clearance Inspection, then replace the clutch end-plate.