Manufacturer Code Charts: 1206

Navigation System DTC Troubleshooting: 1206

DTC 1206:

HDD Error

NOTE:

- Check the vehicle battery condition first Battery Test.
- This navigation DTC sets when there is a problem with the HDD.
- Check any official Honda service website for more information about the navigation system.
- Before you troubleshoot, make sure to follow the General Troubleshooting Information How To Troubleshoot The Navigation System.

1. Clear the hard error code.

2. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode, then back to ON (II), or press the engine start/stop button to select the ON mode.

3. Check for the hard error code.

Is DTC 1206 indicated?

YES -

Replace the HDD HDD Removal/Installation.�

NO -

Intermittent failure, the system is OK at this time. If the vehicle repeatedly comes back with the navigation DTC, replace the audio-navigation unit Audio-Navigation Unit Removal/Installation.�