Manufacturer Code Charts: 1303

Navigation System DTC Troubleshooting: 1303

DTC 1303:

GPS Receiver Error 2

NOTE:

- Check the vehicle battery condition first Battery Test.
- This navigation DTC sets when there is an internal GPS receiver problem.
- Check any official Honda service website for more service information about the navigation system.
- Before you troubleshoot, make sure to follow the General Troubleshooting Information How To Troubleshoot The Navigation System.
- Make sure the vehicle is parked outside, away from buildings.
- Aftermarket electronic devices located near the audio-navigation unit or GPS antenna can potentially interfere with the operation of the navigation system.

1. Clear the hard error code.

2. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.

3. Turn the ignition switch to ON, or press the engine start/stop button to select the ON mode, and wait at least 30 seconds.

4. Check for the hard error code.

Is DTC 1303 indicated?

YES -

Replace the audio-navigation unit Audio-Navigation Unit Removal/Installation.�

NO -

Intermittent failure, the system is OK at this time. If the vehicle repeatedly comes back with the navigation DTC, replace the audio-navigation unit Audio-Navigation Unit Removal/Installation.�