Manufacturer Code Charts: 2611

Navigation System DTC Troubleshooting: 2611

DTC 2611:

HDD Diag

NOTE:

- Check the vehicle battery condition first Battery Test.
- This navigation DTC sets when there is a problem with the HDD.
- Check any official Honda service website for more service information about the navigation system.
- Before you troubleshoot, make sure to follow the General Troubleshooting Information How To Troubleshoot The Navigation System.
- Check for B-CAN DTCs and resolve them before troubleshooting.

1. Clear the hard error code.

2. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode, then back to ON (II) or the ON mode.

3. Go into the System Diagnostic Mode, and select the Self-Diagnosis Mode.

4. Select the HDD in the System Links.

Is HDD status OK indicated?

YES -

Intermittent failure, the system is OK at this time. If the vehicle repeatedly comes back with the navigation DTC, replace the audio-navigation unit Audio-Navigation Unit Removal/Installation.�

NO -

Replace the HDD HDD Removal/Installation.�