E-5

Active Damper System DTC Troubleshooting: 5-1, 5-2, 5-3, 5-4, 7-1, 7-2, 7-3, 7-4, 7-5, E-1, E-2, E-5, E-6, E-7, E-8, E-A, E-C

DTC 5-1:

Active Damper Control Unit Internal Right-Front Damper Coil Drive Circuit Stuck ON

DTC 5-2:

Active Damper Control Unit Internal Left-Front Damper Coil Drive Circuit Stuck ON

DTC 5-3:

Active Damper Control Unit Internal Right-Rear Damper Coil Drive Circuit Stuck ON

DTC 5-4:

Active Damper Control Unit Internal Left-Rear Damper Coil Drive Circuit Stuck ON

DTC 7-1:

Active Damper Control Unit Internal Circuit Malfunction

DTC 7-2:

Active Damper Control Unit Internal Circuit Malfunction

DTC 7-3:

Active Damper Control Unit Internal Circuit Malfunction

DTC 7-4:

Active Damper Control Unit Internal Circuit Malfunction

DTC 7-5:

Active Damper Control Unit Internal Circuit Malfunction

DTC E-1:

Active Damper Control Unit Internal Circuit Malfunction

DTC E-2:

Active Damper Control Unit Internal Circuit Malfunction

DTC E-5:

Active Damper Control Unit Internal Circuit Malfunction

DTC E-6:

Active Damper Control Unit Internal Circuit Malfunction

DTC E-7:

Active Damper Control Unit Internal Circuit Malfunction

DTC E-8:

Active Damper Control Unit Internal Circuit Malfunction

DTC E-A:

Active Damper Control Unit Internal Circuit Malfunction

DTC E-C:

Active Damper Control Unit Internal Circuit Malfunction

1. Press the engine start/stop button to select the ON mode.

2. Clear the DTC with the HDS.

3. Press the engine start/stop button to select the OFF mode.

4. Start the engine, and wait 5 seconds.

5. Check for DTCs with the HDS.

Is DTC 5-1, 5-2, 5-3, 5-4, 7-1, 7-2, 7-3, 7-4, 7-5, E-1, E-2, E-5, E-6, E-7, E-8, E-A, or E-C indicated?

YES -

Replace the active damper control unit Service and Repair.�

NO -

Intermittent failure, the system is OK at this time. Check for poor or loose connections at the active damper control unit.�