Advanced Diagnostics
Advanced Diagnostics - DTC P0351: No. 1 Cylinder Ignition Coil Circuit MalfunctionAdvanced Diagnostics - DTC P0352: No. 2 Cylinder Ignition Coil Circuit Malfunction
Advanced Diagnostics - DTC P0353: No. 3 Cylinder Ignition Coil Circuit Malfunction
Advanced Diagnostics - DTC P0354: No. 4 Cylinder Ignition Coil Circuit Malfunction
Advanced Diagnostics - DTC P0355: No. 5 Cylinder Ignition Coil Circuit Malfunction
Advanced Diagnostics - DTC P0356: No. 6 Cylinder Ignition Coil Circuit Malfunction
General Description
The ignition coil is triggered at the optimum time by the powertrain control module (PCM). The PCM detects a malfunction when the engine is running and the return signal does not change for a specified time, the PCM detects a malfunction and stores a DTC.
Monitor Execution, Sequence, Duration, DTC Type, OBD Status
Enable Conditions
Malfunction Threshold
The return signal does not change for at least 5 seconds when the ignition coil is triggered.
Diagnosis Details
Conditions for setting the DTC
When a malfunction is detected, the MIL comes on and a Pending DTC, a Confirmed DTC, and the freeze data are stored in the PCM memory.
Conditions for clearing the DTC
The MIL is cleared if the malfunction does not return in three consecutive trips in which the diagnostic runs. The MIL, the Pending DTC, the Confirmed DTC, and the freeze data can be cleared with the scan tool Clear command or by disconnecting the battery.