Lighting and Horns: Service and Repair
Exterior Lights Bulb Replacement
Daytime Running Light (DRL)
1. Remove the front bulkhead cover Front Bulkhead Cover Replacement.
2. Remove the front fender trim .
3. Left headlight: Remove the three clips and the battery heat shield (A).
4. Right headlight: Remove the power steering reservoir and set it aside.
5. Disconnect the 2P connector (A) from the headlight.
6. Turn the bulb socket (B) 45 ° counterclockwise to remove it.
7. Install a new bulb in the reverse order of removal.
Front Turn Signal Light/Front Parking Light
1. Remove the front bulkhead cover Front Bulkhead Cover Replacement.
2. Remove the front fender trim .
3. Left headlight: Remove the three clips and the battery heat shield (A).
4. Right headlight: Remove the power steering reservoir and set it aside.
5. Disconnect the 3P connector (A) from the headlight.
6. Turn the bulb socket (B) 45 ° counterclockwise to remove the bulb (C).
7. Install a new bulb in the reverse order of removal.
Front Side Marker Light
1. Remove the front bulkhead cover Front Bulkhead Cover Replacement.
2. Remove the front fender trim .
3. Remove the inner fender.
4. Disconnect the 2P connector (A) from the front side marker light.
5. Turn the bulb socket (B) 45 ° counterclockwise to remove the bulb (C).
6. Install a new bulb in the reverse order of removal.
Fog Light
1. Remove the splash shield Front Splash Shield Replacement.
2. Disconnect the 2P connector (A) from the fog light.
3. Turn the bulb socket (B) 45 ° counterclockwise to remove it from the housing.
4. Install a new bulb in the reverse order of removal.
Back-Up light
1. Open the tailgate.
2. Left back-up light: Remove the service lid.
3. Right back-up light: Remove the tailgate light lid.
4. Disconnect the 2P connector (A) from the fog light.
5. Turn the bulb socket (B) 45 ° counterclockwise to remove the bulb (C).
6. Install a new bulb in the reverse order of removal.