Air Cleaner Housing: Service and Repair

Air Cleaner Removal/Installation

1. Disconnect the breather pipe (A).





2. Disconnect the MAF sensor/IAT sensor connector (B), then remove the intake air duct (C).

NOTE: When tightening the screw of the hose band (D), align the edge of the hose band (E) with the mark (F) painted on the hose band. If you tighten the screw over the mark, replace the hose band.

3. Remove the harness clamps (A) and the harness bracket (B).






4. Remove the air cleaner (A).






5. Install the parts in the reverse order of removal.

If the idle speed fluctuates, do the idle speed inspection Testing and Inspection.