B1750

DTC Troubleshooting: B1050, B2200, B2100, B1200, B1250, B1150, B1750, B1600, B2150, B1800

DTC B1050:

Communication Circuit Error (BUS-OFF)

DTC B1150:

Communication Circuit Error (BUS-OFF)

DTC B1200:

Communication Bus Line (BUS-OFF)

DTC B1250:

Communication Circuit Error (BUS-OFF)

DTC B1600:

Keyless Access ECU Bus Line Error (BUS-OFF)

DTC B1750:

Communication Circuit Error (BUS-OFF)

DTC B1800:

Communication Circuit Error (BUS-OFF)

DTC B2100:

Communication Circuit Error (BUS-OFF)

DTC B2150:

Communication Circuit Error (BUS-OFF)

DTC B2200:

Communication Circuit Error (BUS-OFF)

NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A Troubleshooting - B-CAN System Diagnosis Test Mode A.

1. Clear the DTCs with the HDS.

2. Turn the ignition switch to LOCK (0) and then back to ON (II).

3. Wait for at least 6 seconds.

4. Check for DTCs with the HDS.

Are DTCs B1050, B1150, B1200, B1250, B1600, B1750, B1800, B2100, B2150, and/or B2200 indicated?

YES -

Go to step 5.

NO -

Intermittent failure, the system is OK at this time. Check for loose or poor connections at the MICU and B-CAN connected units in the table.

5. Check for DTCs with the HDS.





Is DTC B1000 also indicated?

YES -

Troubleshoot DTC B1000 B1000.

NO -

Intermittent failure, the system is OK at this time. Check for loose or poor connections at the MICU and B-CAN connected units in the table.