Manufacturer Code Charts: 2603

Navigation System DTC Troubleshooting: 2603

DTC 2603:

Display Diag: RAM

NOTE:

- Check the vehicle battery condition first Battery Test.
- Check for B-CAN DTCs and resolve them before troubleshooting.
- Before you troubleshoot, make sure to follow the General Troubleshooting Information How to Troubleshoot the Navigation System.

1. Clear the hard error code.

2. Turn the ignition switch to LOCK (0), and then back to ON (II).

3. Go into the System Diagnostic Mode, and select the Self-Diagnosis Mode.

4. Check the System Links.

5. Select the Display.

Is the RAM NG?

YES -

Replace the navigation display unit Service and Repair.

NO -

Intermittent failure, the system is OK at this time. If the vehicle repeatedly comes back with the navigation DTC, replace the navigation display unit Service and Repair.