Manufacturer Code Charts: 2702

Navigation System DTC Troubleshooting: 2702

DTC 2702:

GPS Diag: Receiver in Navi ECU

NOTE:

- Check the vehicle battery condition first Battery Test.
- This navigation DTC sets when a problem is detected in the GPS antenna.
- Before you troubleshoot, make sure to follow the general troubleshooting information How to Troubleshoot the Navigation System.
- Make sure the vehicle is parked outside, away from buildings.
- Check for electronic aftermarket accessories (possibly hidden) mounted near the GPS antenna or the navigation unit.
- Check for aftermarket metallic window tint.

1. Clear the hard error code.

2. Turn the ignition switch to LOCK (0) and then back to ON (II).

3. Go into the System Diagnostic Mode, and select the Self-Diagnosis Mode.

4. Select the GPS Ant Info in the System Links.

Is Receiver in Navi ECU OK indicated?

YES -

Intermittent failure, the system is OK at this time. If the vehicle repeatedly comes back with the navigation DTC, replace the navigation unit Service and Repair.

NO -

Replace the navigation unit Service and Repair.