34-11

VSA DTC Troubleshooting: 31-11, 32-11, 33-11, 34-11, 35-11, 36-11, 37-11, 38-11

DTC 31-11:

ABS Solenoid Valve Malfunction

DTC 32-11:

ABS Solenoid Valve Malfunction

DTC 33-11:

ABS Solenoid Valve Malfunction

DTC 34-11:

ABS Solenoid Valve Malfunction

DTC 35-11:

ABS Solenoid Valve Malfunction

DTC 36-11:

ABS Solenoid Valve Malfunction

DTC 37-11:

ABS Solenoid Valve Malfunction

DTC 38-11:

ABS Solenoid Valve Malfunction

NOTE: Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information Reading and Clearing Diagnostic Trouble Codes.

1. Turn the ignition switch to ON (II).

2. Clear the DTC with the HDS.

3. Turn the ignition switch to LOCK (0) and then back to ON (II).

4. Check for DTCs with the HDS.

Is DTC 31-11, 32-11, 33-11, 34-11, 35-11, 36-11, 37-11, or 38-11 indicated?

YES -

Go to step 5.

NO -

Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting.

5. Update the VSA modulator-control unit if it does not have the latest software Testing and Inspection.

6. Turn the ignition switch to LOCK (0) and then back to ON (II).

7. Check for DTCs with the HDS.

Is DTC 31-11, 32-11, 33-11, 34-11, 35-11, 36-11, 37-11, or 38-11 indicated?

YES -

Check for loose terminals in the VSA modulator-control unit 36P connector. If the VSA modulator-control unit was updated and the symptom/indication is still present, replace the VSA modulator-control unit Service and Repair, then retest.

NO -

Troubleshooting is complete. If any other DTCs are indicated, go to the indicated DTCs troubleshooting.