77-5

SH AWD DTC Troubleshooting: 77-5

DTC 77-5:

Yaw Rate-Acceleration Sensor Malfunction

NOTE: Before you troubleshoot, review the general troubleshooting information Initial Inspection and Diagnostic Overview.

1. Turn the ignition switch to ON (II).

2. Clear the DTC with the HDS.

3. Start the engine.

4. Check for DTCs with the HDS.

Is DTC 77-5 indicated?

YES -

Go to step 5.

NO -

Intermittent failure, the system is OK at this time.

5. Check for DTCs in the VSA system with the HDS.

Are there VSA system DTCs indicated?

YES -

Go to the indicated DTC's troubleshooting.

NO -

Substitute a known-good SH-AWD control unit Service and Repair, and recheck. If the symptom/indication goes away with a known-good SH-AWD control unit, replace the original SH-AWD control unit Service and Repair.