Door Lock Knob Switch Test
Door Lock Knob Switch Test
Driver's Door
1. Remove the driver's door panel Front Door Panel Removal/Installation.
2. Disconnect the 10P connector (A) from the actuator (B).
3. Check for continuity between the terminals in each switch position according to the table.
4. If the continuity is not as specified, replace the door latch Service and Repair.
Passenger's Doors
1. Remove the passenger's door panel Front Door Panel Removal/Installation.
2. Disconnect the 10P connector (A) from the actuator (B).
NOTE: The illustration shows the front passenger's door.
3. Check for continuity between the terminals in each switch position according to the table.
[ ]: Left rear door
4. If the continuity is not specified, replace the door latch:
- Front passenger's door latch Service and Repair.
- Rear door latch Service and Repair.