Moonroof Drain Channel Replacement

Moonroof Drain Channel Replacement

1. Remove the moonroof glass Service and Repair.

2. With the moonroof wrench, move both glass brackets (A) to the position where the moonroof normally tilts up, and disconnect the drain channel rods (B) from the joint bushings (C) on both sides.

NOTE: Check the bushings for damage, and replace them if necessary.






3. Slide the drain channel (A) forward.






4. Pull up the rear edge of the drain channel (A) while pushing both clips (B), and release the channel from both hooks (C) of the drain channel slider by pulling it rearward.





5. Remove the drain channel.

6. Install the channel in the reverse order of removal, and note these items:

- Push the clips into place securely.
- Do the glass position adjustment procedure Adjustments.
- Do the moonroof control unit resetting procedure Testing and Inspection.

7. Check for water leaks. Let the water run freely from a hose without a nozzle. Do not use a high-pressure spray.