Rear Door Weatherstrip Replacement

Rear Door Weatherstrip Replacement

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the door or the related parts.
- Use a clip remover to remove the clips.

1. Remove the door checker bracket cover (A), then remove the door checker mounting bolt (B) at the B-pillar.





2. Detach the clips (C, D), and release the door weatherstrip (E) from the holder (F) of the door sash, then remove the door weatherstrip.

3. Install the door weatherstrip in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Make sure the door weatherstrip is installed in the holder securely.
- Apply medium strength liquid thread lock to the door checker mounting bolt before installation.
- Check for water leaks.
- Push the clips into place securely.