Engine Oil Pan Removal

Engine Oil Pan Removal

1. If the engine is out of the vehicle, go to step 6.

2. Raise the vehicle on the lift.

3. Drain the engine oil Service and Repair.

4. Remove the splash shield Service and Repair.

5. Remove exhaust pipe A Service and Repair.

6. Remove the rear WU-TWC bracket.






7. Remove the CKP sensor cover (A) and the bolt (B), then disconnect the CKP sensor connector (C).






8. Remove the torque converter case cover (A) and the four bolts (B) securing the transmission.





9. Remove the bolts securing the oil pan.

10. Using a flat blade screwdriver, separate the oil pan from the block in the places shown.





11. Remove the oil pan.