Sunroof / Moonroof Switch: Testing and Inspection

Moonroof Switch Test/Replacement

1. Remove the roof console Roof Console Replacement.

2. Remove the HomeLink unit from the top of the roof console Roof Console Replacement.

3. Remove the four screws from the roof console (A), and remove the rear cover (B).





4. Disconnect the 7P connector (C) from the moonroof switch (D), then remove the two screws and switch.

5. Check for continuity between the terminals in each switch position according to the table.





6. If the continuity is not as specified, replace the illumination bulb or the switch.

7. If the switch is OK, but there is a malfunction related to the moonroof switch operation, replace the roof console Roof Console Replacement.

8. Install the parts in the reverse order of removal.