Door Switch: Testing and Inspection

Door Switch Test

Driver's Door

1. Remove the driver's door panel Front Door Panel Removal/Installation.

2. Disconnect the 2P connector (A) from the door switch (B).






3. Check for continuity between the terminals in each door position according to the table.





4. If the continuity is not as specified, replace the door latch Service and Repair.

Front Passenger's and Rear Doors

1. Remove the front passenger's door panel Front Door Panel Removal/Installation or rear door panel Rear Door Panel Removal / Installation.

2. Disconnect the 2P connector (A) from the door switch (B).






3. Check for continuity between the terminals in each door position according to the table.





4. If the continuity is not as specified, replace the front door latch Service and Repair or the rear door latch Service and Repair.