Interior Lights (Left Rear Power Window Switch) Input Test
Interior Lights (Left Rear Power Window Switch) Input Test
1. Turn the ignition switch to LOCK (0).
2. Remove the left rear power window switch Passenger's Power Window Switch Test/Replacement.
3. Disconnect the 14P connector from the left rear power window switch.
4. Inspect the connector and socket terminals to be sure they are all making good contact.
- If the terminals are bent, loose or corroded, repair them as necessary and recheck the system.
- If the terminals look OK, go to step 5.
5. With the connector still disconnected, do the following input tests.
- If any test indicates a problem, find and correct the cause, then recheck the system.
- If all the input tests prove OK, replace the left rear power window switch Passenger's Power Window Switch Test/Replacement.