Rear Lower Arm A Replacement

Rear Lower Arm A Replacement

1. Raise and support the vehicle Service and Repair.

2. Remove the rear wheel.

3. Remove lower arm A mounting nut (B), the washers (C) and the mounting bolt (D) from the knuckle side.

NOTE: Use new lower arm A mounting nuts and bolts during reassembly.





4. Remove the self-locking nut (E), the washers (F), and the flange bolt (G), then remove the lower arm A.

5. Install the lower arm A in the reverse order of removal, and note these items:

- First install all of the components, and lightly tighten the bolts and nuts, then raise the suspension to load it with the vehicle's weight before fully tightening to the specified torque.
- Before installing the wheel, clean the mating surfaces on the brake disc/drum and the inside of the wheel.

6. Check the wheel alignment, and adjust it if necessary Service and Repair.