A/T Housing Idler Gear Shaft Bearing Replacement

A/T Housing Idler Gear Shaft Bearing Replacement

Special Tools Required

- Bearing Remover Shaft Set, 22 mm 070MC-MFR0100
- Remover Handle 07936-3710100
- Slide Hammer 07936-371020A
- Driver Handle, 15 x 135L 07749-0010000
- Bearing Driver Attachment, 37 x 40 mm 07746-0010200

1. Heating the transmission housing to about 212 °F (100 °C) using a heat gun (A). Do not heat the transmission housing more than 212 °F (100 °C).






2. Remove the idler gear shaft bearing from the transmission housing using the bearing remover shaft set, the remover handle, and the slide hammer.






3. Install a new bearing until it bottoms in the transmission housing using the driver handle and the bearing driver attachment.