Manufacturer Code Charts: 1305

Navigation System DTC Troubleshooting: 1305

DTC 1305:

Gyro Error 2

NOTE:

- Check the vehicle battery condition first Battery Test.
- This navigation DTC sets when there is a problem with the internal yaw rate sensor.
- Before you troubleshoot, make sure to follow the General Troubleshooting Information How to Troubleshoot the Navigation System.

1. Check that the passenger compartment temperature is between -4 °F (-20 °C) and 158 °F (70 °C).

2. Clear the hard error code.

3. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode, then back to ON (II), or the ON mode.

4. Check for the hard error code.

Is DTC 1305 indicated?

YES -

Replace the audio-navigation unit Audio-Navigation Unit Removal/Installation.

NO -

Intermittent failure, the system is OK at this time. If the vehicle repeatedly comes back with the navigation DTC, replace the audio-navigation unit Audio-Navigation Unit Removal/Installation.