Manufacturer Code Charts: 2610

Navigation System DTC Troubleshooting: 2610

DTC 2610:

DRAM Diag

NOTE:

- Check the vehicle battery condition first Battery Test.
- This navigation DTC sets when a problem with the audio-navigation unit internal DRAM is detected.
- Before you troubleshoot, make sure to follow the General Troubleshooting Information How to Troubleshoot the Navigation System.

1. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode, then back to ON (II), or the ON mode.

2. Go into the System Diagnostic Mode, and select the Self-Diagnosis Mode in the Select Diagnosis items menu.

3. Select the Navi ECU in the System Link.

Is D-RAM OK indicated?

YES -

Intermittent failure, the system is OK at this time. If the vehicle repeatedly comes back with the navigation DTC, replace the audio-navigation unit Audio-Navigation Unit Removal/Installation.

NO -

Replace the audio-navigation unit Audio-Navigation Unit Removal/Installation.