35-05

EPS DTC Troubleshooting: 35-05

DTC 35-05:

EPS Control Unit Internal Circuit (A/D Conversion)

1. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode.

2. Clear the DTC with the HDS.

3. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.

4. Start the engine.

5. Wait 10 seconds or more.

6. Check for DTCs with the HDS.

Is DTC 35-05 indicated?

YES -

Check for loose terminals in the EPS control unit connectors, and repair if necessary. If no poor connections are found, replace the EPS control unit Service and Repair.

NO -

Troubleshoot the indicated DTC. If there are no DTCs, the system is OK at this time.