71-xx

SWS DTC Troubleshooting: 71-xx

DTC 71-xx ("x" can be 0 thru 9 or A thru F):

ODS Unit Not Calibrated

NOTE:

- Before doing this troubleshooting procedure, find out if the vehicle was in a collision. If so, verify that all the required components were replaced with new components, of the correct part number, and that they were properly installed Service and Repair.
- Only read DTCs from the SRS menu, not from SWS menus unless instructed to check SWS DTCs. SWS (ODS unit) DTCs are subcodes of SRS unit DTCs. Only troubleshoot the corresponding SRS DTCs. These SWS DTCs are cleared when you turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.

Do the troubleshooting for SRS DTC 81-71 81-71.