Volume Does Not Change (Without Navigation)

Audio System Symptom Troubleshooting - Volume does not change

Volume does not change (without navigation)

NOTE:

- Check the vehicle battery condition first Battery Test.
- Check the connectors for poor connections or loose terminals.
- Set the fader and balance positions to the center.

1. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode.

2. Turn on the audio unit, and check for sound in each mode (AM/FM and CD).

Is the sound normal?

YES -

Go to step 3.

NO -

Go to Sound Quality Diagnosis Audio System Sound Quality Diagnosis or No sound is heard from the speaker(s) (display is normal) troubleshooting No Sound Is Heard From The Speaker(s) (Display Is Normal) (Without Navigation).

3. Operate the volume knob to see if the volume changes.

Does the volume change?

YES -

Operation is normal.

NO -

Replace the audio unit Audio Unit Removal / Installation.