Active Spoiler Switch: Testing and Inspection

Trunk Lid Spoiler Switch Test/Replacement

With Keyless Access System

1. Open the trunk lid, and remove the trunk lid spoiler Service and Repair.

2. Disconnect the rearview harness 2P connector (A) from the trunk lid spoiler switch 2P connector (B).





3. Remove the three screws, and the trunk lid spoiler switch (C).

4. Check for continuity between the terminals in each switch position according to the table.





5. If the continuity is not as specified, replace the switch.

6. Install the switch in the reverse order of removal.