Front Passenger's Power Seat Adjustment Switch Test/Replacement

Front Passenger's Power Seat Adjustment Switch Test/Replacement

Front Passenger's Seat

NOTE: SRS components are located in this area. Review the SRS component locations Locations, and precautions and procedures Service and Repair before doing repairs or servicing.

1. Remove the front passenger's seat Front Seat Removal / Installation.

2. Remove the power seat adjustment switch knobs (A) and the recline cover from the front passenger's seat Front Seat Recline Cover Removal / Installation, then remove the two screws and the power seat adjustment switch (B).





3. Disconnect the 12P connector from the power seat adjustment switch.

4. Reinstall the adjustment switch knobs to the switch.

5. Check for continuity between the terminals in each switch position according to the table.





6. If the continuity is not as specified, replace the switch.