Transfer Hypoid Drive Gear Bearing Replacement (M/T)

Transfer Hypoid Drive Gear Bearing Replacement

Special Tools Required

- Bearing Driver Attachment, 42 x 47 mm 07746-0010300
- Driver Handle, 15 x 135L 07749-0010000
- Installer Attachment 40 mm 07LAD-PW50601

1. Remove the tapered roller bearing (A) from the transfer hypoid drive gear (B) using the 15 x 135L driver handle (C), the 42 x 47 mm bearing driver attachment (D), a bearing separator (E), and a press.






2. Install a new bearing on the transfer hypoid drive gear using the 15 x 135L driver handle (A), the 40 mm installer attachment (B), 42 x 47 mm bearing driver attachment (C), and a press.