M/T Reverse Shift Lever Clearance Inspection

M/T Reverse Shift Lever Clearance Inspection

1. Measure the clearance between the reverse shift lever (A) and the reverse shift fork (B) with a feeler gauge (C). If the clearance exceeds the service limit, go to step 2.










2. Measure the width of the reverse shift lever.

- If the width is not within the standard, replace the reverse shift lever.

- If the width is within the standard, replace the reverse shift fork.










3. Measure the clearance between the reverse shift lever (A) and the reverse shift piece (B) with a feeler gauge (C). If the clearance exceeds the service limit, go to step 4.










4. Measure the width of the reverse shift lever.

- If the width is not within the standard, replace the reverse shift lever.

- If the width is within the standard, replace the reverse shift piece.