Fuel Door Release Actuator: Testing and Inspection

Fuel Fill Door Lock Actuator Test/Replacement

Sedan

1. Open the trunk lid, and remove the left trunk side trim panel .

2. Disconnect the 2P connector (A) from the fuel fill door lock actuator (B).






3. Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only momentarily.





4. If the actuator does not operate as specified, replace it.

5. Install the parts in the reverse order of removal.

Sport Wagon

1. Open the tailgate, and remove the left cargo area side trim panel .

2. Disconnect the 2P connector (A) from the fuel fill door lock actuator (B).






3. Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only momentarily.





4. If the actuator does not operate as specified, replace it.

5. Install the parts in the reverse order of removal.