Rear Fender Liner: Service and Repair

Rear Inner Fender Replacement

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the rear bumper or the body.

1. Remove the screws (A) securing the rear inner fender (B) and the rear bumper (C), and remove the screw (D) securing the rear inner fender and the body.






2. Pull on the rear bumper (A) at the wheel arch area. Pull out the grommet (B) while pinching the tabs (C) on the end of the grommet, then remove it from the body, and remove the rear inner fender (D).





3. Install the inner fender in the reverse order of removal, and note these items:

- If the grommet is damaged or stress-whitened, replace them with a new one.
- Push the grommet into place securely.