Door Lock Knob Switch Test

Door Lock Knob Switch Test

Driver's Door

1. Remove the driver's door panel Front Door Panel Removal / Installation.

2. Disconnect the 10P connector (A) from the door lock actuator (B).






3. Check for continuity between the terminals in each switch position according to the table.





4. If the continuity is not as specified, the switch is faulty; replace the driver's door latch Service and Repair.

Passenger Doors

1. Remove the passenger's door panel.

- Passenger's door Front Door Panel Removal / Installation
- Left rear and right rear doors Rear Door Panel Removal / Installation

2. Disconnect the 10P connector (A) from the door lock actuator (B).






3. Check for continuity between the terminals in each switch position according to the table.





4. If the continuity is not as specified, the switch is faulty; replace the door latch:

- Passenger's door latch Service and Repair
- Left rear and right rear door latches Service and Repair