Rear Door Weatherstrip: Service and Repair

Rear Door Weatherstrip Replacement

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the door.
- Take care not to damage the front upper corner clip (black) and the rear corner clips (black) because they are not available separately.
- Use a clip remover to remove the clips.

1. Remove the door weatherstrip (A).

1. Remove the door checker mounting bolt (B) at the B-pillar.

2. Detach the clips (C, D, E).

3. Release the door weatherstrip from the holder (F) on the door sash.





2. Install the weatherstrip in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.
- Make sure the weatherstrip is installed in the holder securely.
- Apply medium strength liquid thread lock to the door checker mounting bolt before installation.
- Check for water leaks.