Removal and Replacement

Alternator Removal and Installation

Removal

1. Do the battery terminal disconnection procedure Procedures.

2. Remove the drive belt Service and Repair.

3. Remove the two bolts securing the alternator.






4. Disconnect the alternator connector (A) and the positive alternator cable (B), and remove the harness clamp (C), then remove the alternator.






Installation

1. Install the alternator, then connect the alternator connector (A) and the positive alternator cable (B), and install the harness clamp (C). Make sure the crimped side of the ring terminal faces away from the alternator when you connect it.






2. Tighten the two bolts securing the alternator.





3. Install the drive belt Service and Repair.

4. Do the battery terminal reconnection procedure Procedures.