Rear Lower Arm A Replacement

Rear Lower Arm A Replacement

1. Raise and support the vehicle Service and Repair.

2. Remove the rear wheel.

3. Remove the parking brake cable mounting bolt (B).





4. Remove the lower arm A mounting bolts, then remove lower arm A.

NOTE: Use new mounting bolts during reassembly.

5. Install lower arm A in the reverse order of removal, and note these items:

- First install all of the components, and lightly tighten the bolts, then raise the suspension to load it with the vehicle's weight before fully tightening to the specified torque.
- Before installing the wheel, clean the mating surfaces between the brake disc and the inside of the wheel.

6. Check the wheel alignment, and adjust it if necessary Service and Repair.